Wet Cooling Tower Operating Principle
 

How does a wet cooling tower work ?

 

Cooling towers are divided as counter flow and cross flow towers according to operating principles. In counter flow cooling towers, the water flows top-down while the air moves from down-top. In cross flow cooling towers, while the water fall top-down, air current is horizontal. In recent years, forced draft counter flow towers has being preferred.


In counter flow induced draft type cooling  towers, heated water, coming from facility, is homogenously sprayed to all section of tower in top-down with the help of specially manufactured waterworks system and fountains. Sprayed water mass falls into pieces by floating in tower fills. Air, having the humidity  of exterior environment, is absorbed from down to top on fills  with the help of motor fan group. Water, meeting the air on the inlay cooling surface, heats input to the air and a part of it  cools by vapouring. Cool water is sent to facility by gathering in tower cold water basin. Air, whose humidity  rises (close to saturation point) as result of vapouring, is thrown to atmosphere from the fan deck at the top of tower.

 

According to thermodynamic facts; for achieving each gram water’s phase change, nearly 540 cal/energy is absorbed from the system.


With this approach; for each  6 ºC cooling of water, circulating in the system, nearly %0,9 of water flow rate must vapour. This amount can be calculated with formula above:


Vapouring Amount(m³/h) = 0.00085 x 1.8 x Flow (m³/h) x (TinTout)

 

 

 

 


 

     
     
    << back
 
 
 

ENSOTEK CTP Su Soğutma Kuleleri ve Teknolojileri Mühendislik San.Tic. Ltd. Şti

Muratpaşa Mah. Uluyol Cad. No:19 İstanbul Tower K:5 Bayrampaşa İSTANBUL - TÜRKİYE
Tel: +90212 613 33 09 - 01 (Pbx) - Fax: +90212 613 33 10

Ensotek Cooling Towers Copyright © 2006 - 2014

Web Tasarım MW